
Strainers
Here you can find a list of all our Strainers

Y-Type Strainer
Fig. 7101
Working pressure:
16bar/25bar
Note:
CI Body For PN16&Class 125
DI Body For PN25&Class 250
Material Specification:
| Part | Material | ASTM Spec |
|---|---|---|
| Body | Cast Iron Ductile Iron |
A126 Class B A536 65-45-12 |
| Cover | Cast Iron Ductile Iron |
A126 Class B A536 65-45-12 |
| Screen | Stainless Steel | AISI 304 |
| Blow-Off Plug | Carbon Steel | |
| Gasket | Graphite / Teflon | Commercial |
Standard Screen:
| Size〔mm 〕 | Hole Dia. 〔mm 〕 | Mesh |
|---|---|---|
| 40~150 | 1.5 | 104 |
| 200~350 | 2.5 | 26 |
| 400~650 | 3.5 | 22 |
Dimensions(mm/inch):
| DN | mm inch |
40 1-1/2 |
50 2 |
65 2-1/2 |
80 3 |
100 4 |
125 5 |
150 6 |
200 8 |
250 10 |
300 12 |
350 14 |
400 16 |
450 18 |
500 20 |
600 24 |
650 26 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 | 980 | 1100 | 1200 | 1250 | 1450 | 1550 | |
| H | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 | 980 | 1100 | 1200 | 1250 | 1450 | 1550 |
Basket Type Strainer
Fig. 7105
Working pressure:
16bar/25bar
Note:
CI Body For PN16&Class 125
DI Body For PN25&Class 250
Material Specification:
| Working pressure | 16bar |
|---|---|
| Testing Pressure | Shell:24bar Seal:17.6bar |
| Working Temperature | -10°C to 120°C |
| Suitable Media | Water,Oil&Gas |
Standard Screen:
| Size〔mm 〕 | Hole Dia. 〔mm 〕 | Mesh |
|---|---|---|
| 50~80 | 1.5 | 104 |
| 100~400 | 3.0 | 40 |
| 450~600 | 5.0 | 12 |
Dimensions(mm/inch):
| DN | mm inch |
50 2 |
65 2-1/2 |
80 3 |
100 4 |
125 5 |
150 6 |
200 8 |
250 10 |
300 12 |
350 14 |
400 16 |
450 18 |
500 20 |
600 24 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | 207 | 210 | 251 | 292 | 334 | 378 | 472 | 511 | 680 | 769 | 842 | 842 | 842 | 1054 | |
| H1 | 135 | 155 | 190 | 205 | 219 | 235 | 295 | 335 | 405 | 585 | 590 | 590 | 600 | 1175 | |
| H2 | 90 | 95 | 105 | 117 | 146 | 165 | 215 | 325 | 355 | 345 | 390 | 420 | 510 | 515 |
Y-Pattern Strainer
Fig. 7309
Features:
– Filter debris carried by the fluid in pipeline
– Stainless Steel perforated screen inside
– Machined test point plugs are available
Working pressure:
16bar
Material List:
| Part | Material | Specification |
|---|---|---|
| Body | Ductile Iron | EN-JS 1050 |
| Bonnet | Ductile Iron | EN-JS 1050 |
| Screen | Stainless Steel 304 | - |
| O-Ring | EPDM | - |
| Drain Plug | Stainless Steel 201 | - |
| Bolt | Steel | - |
| Nut | Steel | - |




